Description
This floor standing radial drilling machine is good value for a workshop needing to drill wide workpieces. In addition, the tilting head allows drilling beyond the vertical.
The drilling width is variable, between 220mm and 420mm. The horizontal movement of the head is controlled by a rack and pinion system. Tilting the head is achieved by undoing a locking knob, setting the required angle against a scale and re-locking the knob. There is a positive locating pin to ensure that the head returns exactly to the vertical.
The AW680RD has a 550W induction motor and a choice of 5 pulleys give a speed range of 460-2,480 rpm. It comes with a quality 1-16mm keyless chuck. There is a two-part table assembly for greater versatility.
In other respects, this pillar drill is similar to the standard models, with a true running chuck spindle and a good fit of the quill assembly into the headstock casting to ensure consistent drilling. The drill comes fitted with rubber down feed grips, NVR switch, chuck guard, and belt cover safety switch.
Caution: The chuck is located in the quill on a 2MT arbor. If the head is used in the horizontal position together with a sanding drum for example, there is a risk of the chuck coming loose.
Tip: Morse tapers are self-locking, wipe off any oil or grease from the arbor and inside the quill.
As this is a floor standing pillar drill, we advise bolting to the floor.
- Variable drilling width: 220mm to 420mm for versatile workpiece handling.
- Tilting head: Allows for drilling beyond the vertical with ease.
- Rack and pinion system: Provides smooth horizontal head movement.
- 550W induction motor: Delivers reliable power for various drilling tasks.
- Speed range: 460-2,480 rpm (5 pulleys) for different material requirements.
- Two-part table assembly: Enhances versatility and stability during use.
- Keyless chuck: Quality 1-16mm chuck for quick and easy bit changes.
- Safety features: NVR switch, chuck guard, and belt cover safety switch for safe operation.
Technical Data
| Base Size | 450 mm x 270 mm |
| Chuck Capacity | 1 mm to 16 mm |
| Chuck Travel | 80 mm |
| Chuck Type | Keyless |
| Collar Size | 55 mm |
| Diameter of Column | 70 mm |
| Max Chuck to Base | 1,180 mm |
| Max Chuck to Table | 680 mm |
| Max Drilling Mild Steel | 16 mm |
| Morse Taper | 2 MT |
| Nett Weight | 61 kg |
| Overall Dimensions (L x W x H) | 820 mm x 320 mm x 1,630 mm |
| Power | 550 W |
| Rating | Home Workshop |
| Speed Range | 460 – 2,480 rpm (5) |
| Table Size | 310 mm diameter |
| Table Tilt | 45° – 0° – 45° |
| Throat Depth | 420 mm |
| Voltage | 230 V |
Includes
- 1 x AW680RD Radial Drilling Machine
- 1 x Keyless Chuck (1-16mm)
